diff --git a/branches/follower/wiz810mj/src/lib/types.h b/branches/follower/wiz810mj/src/lib/types.h
index a9e7241..6769ca2 100644
--- a/branches/follower/wiz810mj/src/lib/types.h
+++ b/branches/follower/wiz810mj/src/lib/types.h
@@ -1,183 +1,183 @@
-/*
-*
-@file		type.h
-*
-*/
-
-#ifndef _TYPE_H_
-#define _TYPE_H_
-
-
-/***************************************************
- * attribute for mcu ( types, ... ) 
- ***************************************************/
-//#include "mcu_define.h"
-#define __MCU_AVR__	1
-#define __MCU_TYPE__	__MCU_AVR__
-
-//---- Refer "Rom File Maker Manual Vx.x.pdf"
-#include <avr/pgmspace.h>
-
-#define	_ENDIAN_LITTLE_	0	/**<  This must be defined if system is little-endian alignment */
-#define	_ENDIAN_BIG_		1
-#define 	SYSTEM_ENDIAN		_ENDIAN_LITTLE_
-
-#define	MAX_SOCK_NUM		4	/**< Maxmium number of socket  */
-#define	CLK_CPU			8000000		/**< 8Mhz(for serial) */
-
-/* ## __DEF_IINCHIP_xxx__ : define option for iinchip driver *****************/
-#define __DEF_IINCHIP_DBG__ /* involve debug code in driver (socket.c) */
-#define __DEF_IINCHIP_INT__ /**< involve interrupt service routine (socket.c) */
-#define __DEF_IINCHIP_PPP__ /* involve pppoe routine (socket.c) */
-                            /* If it is defined, the source files (md5.h,md5.c) must
-                               be included in your project.
-                               Otherwise, the source files must be removed from your
-                               project. */
-
-#define __DEF_IINCHIP_DIRECT_MODE__ 1
-#define __DEF_IINCHIP_INDIRECT_MODE__ 2
-#define __DEF_IINCHIP_SPI_MODE__ 3
-#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_DIRECT_MODE__
-//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_INDIRECT_MODE__
-//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_SPI_MODE__ /*Enable SPI_mode*/
-
-
-/**
-@brief	 __DEF_IINCHIP_MAP_xxx__ : define memory map for iinchip 
-*/
-#define __DEF_IINCHIP_MAP_BASE__ 0x8000
-#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__)
- #define COMMON_BASE __DEF_IINCHIP_MAP_BASE__
-#else
- #define COMMON_BASE 0x0000
-#endif
-#define __DEF_IINCHIP_MAP_TXBUF__ (COMMON_BASE + 0x4000) /* Internal Tx buffer address of the iinchip */
-#define __DEF_IINCHIP_MAP_RXBUF__ (COMMON_BASE + 0x6000) /* Internal Rx buffer address of the iinchip */
-
-
-#if (__MCU_TYPE__ == __MCU_AVR__)
-   #ifdef __DEF_IINCHIP_INT__
-      // iinchip use external interrupt 4
-      #define IINCHIP_ISR_DISABLE()	(EIMSK &= ~(0x10))
-      #define IINCHIP_ISR_ENABLE()	(EIMSK |= 0x10)
-      #define IINCHIP_ISR_GET(X)		(X = EIMSK)
-      #define IINCHIP_ISR_SET(X)		(EIMSK = X)
-   #else
-      #define IINCHIP_ISR_DISABLE()
-      #define IINCHIP_ISR_ENABLE()	
-      #define IINCHIP_ISR_GET(X)
-      #define IINCHIP_ISR_SET(X)
-   #endif
-#else
-#error "unknown MCU type"
-#endif
-
-
-/* gcc version */
-/* WinAVR-20050214-install.exe */
-#define __WINAVR_20050214__	0
-#define __WINAVR_20060125__	1
-#define __WINAVR_20060421__	2
-
-/* #define __COMPILER_VERSION__	__WINAVR_20060421__ // <- move makefile*/
-
-#if (__COMPILER_VERSION__ == __WINAVR_20050214__)
-#ifndef __STDIO_FDEVOPEN_COMPAT_12 
-#define __STDIO_FDEVOPEN_COMPAT_12
-#endif
-#endif
-
-#ifndef NULL
-#define NULL		((void *) 0)
-#endif
-
-typedef enum { false, true } bool;
-
-#ifndef _SIZE_T
-#define _SIZE_T
-typedef unsigned int size_t;
-#endif
-
-/**
- * The 8-bit signed data type.
- */
-typedef char int8;
-/**
- * The volatile 8-bit signed data type.
- */
-typedef volatile char vint8;
-/**
- * The 8-bit unsigned data type.
- */
-typedef unsigned char uint8;
-/**
- * The volatile 8-bit unsigned data type.
- */
-typedef volatile unsigned char vuint8;
-
-/**
- * The 16-bit signed data type.
- */
-typedef int int16;
-/**
- * The volatile 16-bit signed data type.
- */
-typedef volatile int vint16;
-/**
- * The 16-bit unsigned data type.
- */
-typedef unsigned int uint16;
-/**
- * The volatile 16-bit unsigned data type.
- */
-typedef volatile unsigned int vuint16;
-/**
- * The 32-bit signed data type.
- */
-typedef long int32;
-/**
- * The volatile 32-bit signed data type.
- */
-typedef volatile long vint32;
-/**
- * The 32-bit unsigned data type.
- */
-typedef unsigned long uint32;
-/**
- * The volatile 32-bit unsigned data type.
- */
-typedef volatile unsigned long vuint32;
-
-/* bsd */
-typedef uint8			u_char;		/**< 8-bit value */
-typedef uint8 			SOCKET;
-typedef uint16			u_short;	/**< 16-bit value */
-typedef uint16			u_int;		/**< 16-bit value */
-typedef uint32			u_long;		/**< 32-bit value */
-
-typedef union _un_l2cval {
-	u_long	lVal;
-	u_char	cVal[4];
-}un_l2cval;
-
-typedef union _un_i2cval {
-	u_int	iVal;
-	u_char	cVal[2];
-}un_i2cval;
-
-
-/** global define */
-#define FW_VERSION		0x01000001	/**< System F/W Version(test) : 0.0.0.1	*/
-#define HW_PM_VERSION	"0.1"
-#define HW_NM_VERSION	"0.1"
-#define HW_MB_VERSION	"0.1"
-
-
-#define TX_RX_MAX_BUF_SIZE	2048
-#define TX_BUF	0x1100
-#define RX_BUF	(TX_BUF+TX_RX_MAX_BUF_SIZE)
-
-#define UART_DEVICE_CNT		1	/**< UART device number */
-/* #define SUPPORT_UART_ONE */
-
-#endif		/* _TYPE_H_ */
+/*
+*
+@file		type.h
+*
+*/
+
+#ifndef _TYPE_H_
+#define _TYPE_H_
+
+
+/***************************************************
+ * attribute for mcu ( types, ... ) 
+ ***************************************************/
+//#include "mcu_define.h"
+#define __MCU_AVR__	1
+#define __MCU_TYPE__	__MCU_AVR__
+
+//---- Refer "Rom File Maker Manual Vx.x.pdf"
+#include <avr/pgmspace.h>
+
+#define	_ENDIAN_LITTLE_	0	/**<  This must be defined if system is little-endian alignment */
+#define	_ENDIAN_BIG_		1
+#define 	SYSTEM_ENDIAN		_ENDIAN_LITTLE_
+
+#define	MAX_SOCK_NUM		4	/**< Maxmium number of socket  */
+#define	CLK_CPU			8000000		/**< 8Mhz(for serial) */
+
+/* ## __DEF_IINCHIP_xxx__ : define option for iinchip driver *****************/
+#define __DEF_IINCHIP_DBG__ /* involve debug code in driver (socket.c) */
+#define __DEF_IINCHIP_INT__ /**< involve interrupt service routine (socket.c) */
+#define __DEF_IINCHIP_PPP__ /* involve pppoe routine (socket.c) */
+                            /* If it is defined, the source files (md5.h,md5.c) must
+                               be included in your project.
+                               Otherwise, the source files must be removed from your
+                               project. */
+
+#define __DEF_IINCHIP_DIRECT_MODE__ 1
+#define __DEF_IINCHIP_INDIRECT_MODE__ 2
+#define __DEF_IINCHIP_SPI_MODE__ 3
+#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_DIRECT_MODE__
+//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_INDIRECT_MODE__
+//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_SPI_MODE__ /*Enable SPI_mode*/
+
+
+/**
+@brief	 __DEF_IINCHIP_MAP_xxx__ : define memory map for iinchip 
+*/
+#define __DEF_IINCHIP_MAP_BASE__ 0x8000
+#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__)
+ #define COMMON_BASE __DEF_IINCHIP_MAP_BASE__
+#else
+ #define COMMON_BASE 0x0000
+#endif
+#define __DEF_IINCHIP_MAP_TXBUF__ (COMMON_BASE + 0x4000) /* Internal Tx buffer address of the iinchip */
+#define __DEF_IINCHIP_MAP_RXBUF__ (COMMON_BASE + 0x6000) /* Internal Rx buffer address of the iinchip */
+
+
+#if (__MCU_TYPE__ == __MCU_AVR__)
+   #ifdef __DEF_IINCHIP_INT__
+      // iinchip use external interrupt 4
+      #define IINCHIP_ISR_DISABLE()	(EIMSK &= ~(0x10))
+      #define IINCHIP_ISR_ENABLE()	(EIMSK |= 0x10)
+      #define IINCHIP_ISR_GET(X)		(X = EIMSK)
+      #define IINCHIP_ISR_SET(X)		(EIMSK = X)
+   #else
+      #define IINCHIP_ISR_DISABLE()
+      #define IINCHIP_ISR_ENABLE()	
+      #define IINCHIP_ISR_GET(X)
+      #define IINCHIP_ISR_SET(X)
+   #endif
+#else
+#error "unknown MCU type"
+#endif
+
+
+/* gcc version */
+/* WinAVR-20050214-install.exe */
+#define __WINAVR_20050214__	0
+#define __WINAVR_20060125__	1
+#define __WINAVR_20060421__	2
+
+/* #define __COMPILER_VERSION__	__WINAVR_20060421__ // <- move makefile*/
+
+#if (__COMPILER_VERSION__ == __WINAVR_20050214__)
+#ifndef __STDIO_FDEVOPEN_COMPAT_12 
+#define __STDIO_FDEVOPEN_COMPAT_12
+#endif
+#endif
+
+#ifndef NULL
+#define NULL		((void *) 0)
+#endif
+
+typedef enum { false, true } bool;
+
+#ifndef _SIZE_T
+#define _SIZE_T
+typedef unsigned int size_t;
+#endif
+
+/**
+ * The 8-bit signed data type.
+ */
+typedef char int8;
+/**
+ * The volatile 8-bit signed data type.
+ */
+typedef volatile char vint8;
+/**
+ * The 8-bit unsigned data type.
+ */
+typedef unsigned char uint8;
+/**
+ * The volatile 8-bit unsigned data type.
+ */
+typedef volatile unsigned char vuint8;
+
+/**
+ * The 16-bit signed data type.
+ */
+typedef int int16;
+/**
+ * The volatile 16-bit signed data type.
+ */
+typedef volatile int vint16;
+/**
+ * The 16-bit unsigned data type.
+ */
+typedef unsigned int uint16;
+/**
+ * The volatile 16-bit unsigned data type.
+ */
+typedef volatile unsigned int vuint16;
+/**
+ * The 32-bit signed data type.
+ */
+typedef long int32;
+/**
+ * The volatile 32-bit signed data type.
+ */
+typedef volatile long vint32;
+/**
+ * The 32-bit unsigned data type.
+ */
+typedef unsigned long uint32;
+/**
+ * The volatile 32-bit unsigned data type.
+ */
+typedef volatile unsigned long vuint32;
+
+/* bsd */
+typedef uint8			u_char;		/**< 8-bit value */
+typedef uint8 			SOCKET;
+typedef uint16			u_short;	/**< 16-bit value */
+typedef uint16			u_int;		/**< 16-bit value */
+typedef uint32			u_long;		/**< 32-bit value */
+
+typedef union _un_l2cval {
+	u_long	lVal;
+	u_char	cVal[4];
+}un_l2cval;
+
+typedef union _un_i2cval {
+	u_int	iVal;
+	u_char	cVal[2];
+}un_i2cval;
+
+
+/** global define */
+#define FW_VERSION		0x01000001	/**< System F/W Version(test) : 0.0.0.1	*/
+#define HW_PM_VERSION	"0.1"
+#define HW_NM_VERSION	"0.1"
+#define HW_MB_VERSION	"0.1"
+
+
+#define TX_RX_MAX_BUF_SIZE	2048
+#define TX_BUF	0x1100
+#define RX_BUF	(TX_BUF+TX_RX_MAX_BUF_SIZE)
+
+#define UART_DEVICE_CNT		1	/**< UART device number */
+/* #define SUPPORT_UART_ONE */
+
+#endif		/* _TYPE_H_ */