Remove unused file.

git-svn-id: svn+ssh://oldsvn/home/mlalondesvn/svn/cral@51 3ee9b42a-b53c-0410-a25e-f0b6218d5d5b
master
follower 17 years ago
parent 47a0ac06f0
commit 680c63d572

@ -1,66 +0,0 @@
/**
@file mcu_define.h
*/
#ifndef __MCU_DEFINE_H__
#define __MCU_DEFINE_H__
#define __MCU_AVR__ 1
#define __MCU_TYPE__ __MCU_AVR__
//---- Refer "Rom File Maker Manual Vx.x.pdf"
#include <avr/pgmspace.h>
#define _ENDIAN_LITTLE_ 0 /**< This must be defined if system is little-endian alignment */
#define _ENDIAN_BIG_ 1
#define SYSTEM_ENDIAN _ENDIAN_LITTLE_
#define MAX_SOCK_NUM 4 /**< Maxmium number of socket */
#define CLK_CPU 8000000 /**< 8Mhz(for serial) */
/* ## __DEF_IINCHIP_xxx__ : define option for iinchip driver *****************/
//#define __DEF_IINCHIP_DBG__ /* involve debug code in driver (socket.c) */
#define __DEF_IINCHIP_INT__ /**< involve interrupt service routine (socket.c) */
//#define __DEF_IINCHIP_PPP__ /* involve pppoe routine (socket.c) */
/* If it is defined, the source files(md5.h,md5.c) must be included in your project.
Otherwize, the source files must be removed in your project. */
#define __DEF_IINCHIP_DIRECT_MODE__ 1
#define __DEF_IINCHIP_INDIRECT_MODE__ 2
#define __DEF_IINCHIP_SPI_MODE__ 3
#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_DIRECT_MODE__
//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_INDIRECT_MODE__
//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_SPI_MODE__ /*Enable SPI_mode*/
/**
@brief __DEF_IINCHIP_MAP_xxx__ : define memory map for iinchip
*/
#define __DEF_IINCHIP_MAP_BASE__ 0x8000
#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__)
#define COMMON_BASE __DEF_IINCHIP_MAP_BASE__
#else
#define COMMON_BASE 0x0000
#endif
#define __DEF_IINCHIP_MAP_TXBUF__ (COMMON_BASE + 0x4000) /* Internal Tx buffer address of the iinchip */
#define __DEF_IINCHIP_MAP_RXBUF__ (COMMON_BASE + 0x6000) /* Internal Rx buffer address of the iinchip */
#if (__MCU_TYPE__ == __MCU_AVR__)
#ifdef __DEF_IINCHIP_INT__
// iinchip use external interrupt 4
#define IINCHIP_ISR_DISABLE() (EIMSK &= ~(0x10))
#define IINCHIP_ISR_ENABLE() (EIMSK |= 0x10)
#define IINCHIP_ISR_GET(X) (X = EIMSK)
#define IINCHIP_ISR_SET(X) (EIMSK = X)
#else
#define IINCHIP_ISR_DISABLE()
#define IINCHIP_ISR_ENABLE()
#define IINCHIP_ISR_GET(X)
#define IINCHIP_ISR_SET(X)
#endif
#else
#error "unknown MCU type"
#endif
#endif
Loading…
Cancel
Save