Remove unused file.

git-svn-id: svn+ssh://oldsvn/home/mlalondesvn/svn/cral@51 3ee9b42a-b53c-0410-a25e-f0b6218d5d5b

branches/follower/wiz810mj/src/lib/mcu_define.h

@@ -1,66 +0,0 @@
-/**
- @file		mcu_define.h
- */
-
-#ifndef __MCU_DEFINE_H__
-#define __MCU_DEFINE_H__
-
-
-#define __MCU_AVR__	1
-#define __MCU_TYPE__	__MCU_AVR__
-
-//---- Refer "Rom File Maker Manual Vx.x.pdf"
-#include <avr/pgmspace.h>
-
-#define	_ENDIAN_LITTLE_	0	/**<  This must be defined if system is little-endian alignment */
-#define	_ENDIAN_BIG_		1
-#define 	SYSTEM_ENDIAN		_ENDIAN_LITTLE_
-
-#define	MAX_SOCK_NUM		4	/**< Maxmium number of socket  */
-#define	CLK_CPU			8000000		/**< 8Mhz(for serial) */
-
-/* ## __DEF_IINCHIP_xxx__ : define option for iinchip driver *****************/
-//#define __DEF_IINCHIP_DBG__ /* involve debug code in driver (socket.c) */
-#define __DEF_IINCHIP_INT__ /**< involve interrupt service routine (socket.c) */
-//#define __DEF_IINCHIP_PPP__ /* involve pppoe routine (socket.c) */
-                            /* If it is defined, the source files(md5.h,md5.c) must be included in your project.
-                               Otherwize, the source files must be removed in your project. */
-
-#define __DEF_IINCHIP_DIRECT_MODE__ 1
-#define __DEF_IINCHIP_INDIRECT_MODE__ 2
-#define __DEF_IINCHIP_SPI_MODE__ 3
-#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_DIRECT_MODE__
-//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_INDIRECT_MODE__
-//#define __DEF_IINCHIP_BUS__ __DEF_IINCHIP_SPI_MODE__ /*Enable SPI_mode*/
-
-
-/**
-@brief	 __DEF_IINCHIP_MAP_xxx__ : define memory map for iinchip 
-*/
-#define __DEF_IINCHIP_MAP_BASE__ 0x8000
-#if (__DEF_IINCHIP_BUS__ == __DEF_IINCHIP_DIRECT_MODE__)
- #define COMMON_BASE __DEF_IINCHIP_MAP_BASE__
-#else
- #define COMMON_BASE 0x0000
-#endif
-#define __DEF_IINCHIP_MAP_TXBUF__ (COMMON_BASE + 0x4000) /* Internal Tx buffer address of the iinchip */
-#define __DEF_IINCHIP_MAP_RXBUF__ (COMMON_BASE + 0x6000) /* Internal Rx buffer address of the iinchip */
-
-
-#if (__MCU_TYPE__ == __MCU_AVR__)
-   #ifdef __DEF_IINCHIP_INT__
-      // iinchip use external interrupt 4
-      #define IINCHIP_ISR_DISABLE()	(EIMSK &= ~(0x10))
-      #define IINCHIP_ISR_ENABLE()	(EIMSK |= 0x10)
-      #define IINCHIP_ISR_GET(X)		(X = EIMSK)
-      #define IINCHIP_ISR_SET(X)		(EIMSK = X)
-   #else
-      #define IINCHIP_ISR_DISABLE()
-      #define IINCHIP_ISR_ENABLE()	
-      #define IINCHIP_ISR_GET(X)
-      #define IINCHIP_ISR_SET(X)
-   #endif
-#else
-#error "unknown MCU type"
-#endif
-#endif