DS1803:

MODIF - Address definition to easily allow choosing the 3 address bit
	MODIF - DPOT_* definitions to DS1803_*
twiLCD:
	MODIF - Address definition to easily allow choosing the 3 address bit

git-svn-id: svn+ssh://oldsvn/home/mlalondesvn/svn/cral@6 3ee9b42a-b53c-0410-a25e-f0b6218d5d5b

ds1803/ds1803.cpp

@@ -21,9 +21,9 @@ DS1803 DPOT = DS1803();
 
 void DS1803::setWiper(uint8_t value, uint8_t wiperAddr)
 {
-	if (!Wire.checkAddress(DPOT_WADDR)) return;
+	if (!Wire.checkAddress(DS1803_WADDR)) return;
 	
-	Wire.beginTransmission(DPOT_WADDR);
+	Wire.beginTransmission(DS1803_WADDR);
 	Wire.send(wiperAddr); // Send the wiper address
 	
 	Wire.send(value);
@@ -33,9 +33,9 @@ void DS1803::setWiper(uint8_t value, uint8_t wiperAddr)
 /*
 uint8_t DS1803::getValue()
 {
-	if (!Wire.checkAddress(DPOT_WADDR)) return;
+	if (!Wire.checkAddress(DS1803_WADDR)) return;
 	
-	Wire.requestFrom(DPOT_RADDR, 2);
+	Wire.requestFrom(DS1803_RADDR, 2);
 	
 	while (Wire.available()) {
 		Serial.println((uint8_t)Wire.receive(), DEC);

ds1803/ds1803.h

@@ -3,27 +3,36 @@
 
 #include <inttypes.h>
 
-#define DPOT_WADDR		0x28
-#define DPOT_RADDR		DPOT_WADDR | 0x01
+/**
+ * Address byte selection
+ * Select 0 for low and 1 for high
+**/
+#define DS1803_A0			0
+#define DS1803_A1			0
+#define DS1803_A2			0
+
+#define DS1803_BASE_ADDR	B00101000
+#define DS1803_WADDR		DS1803_BASE_ADDR | (DS1803_A0 * B00000001) | (DS1803_A1 * B00000010) | (DS1803_A2 * B00000100)
+#define DS1803_RADDR		DS1803_WADDR | 0x01
 
 /**
  * The number of available potentiometer wipers
 **/
-#define	DPOT_NBR_WIPERS	0x02
+#define	DS1803_NBR_WIPERS	0x02
 
 /**
  * Digital pot selection commands
 **/
-#define DPOT_WIPERS		B10101111
-#define DPOT_WIPER_0	B10101001
-#define DPOT_WIPER_1	B10101010
+#define DS1803_WIPERS	B10101111
+#define DS1803_WIPER_0	B10101001
+#define DS1803_WIPER_1	B10101010
 
 /**
  * Macros
 **/
-#define setWiper1(value) setWiper(value, DPOT_WIPER_0)
-#define setWiper2(value) setWiper(value, DPOT_WIPER_1)
-#define setWipers(value) setWiper(value, DPOT_WIPERS)
+#define setWiper1(value) setWiper(value, DS1803_WIPER_0)
+#define setWiper2(value) setWiper(value, DS1803_WIPER_1)
+#define setWipers(value) setWiper(value, DS1803_WIPERS)
 
 /**
  * DS1803 I2C Dual Digital Pot.

twiLCD/twiLCD.h

@@ -5,7 +5,16 @@
 	#include "../configs/LCD/lcd.h"
 	#include "twiLCDConfig.h"
 	
-	#define PCF8574_WADDR		0x20
+	/**
+	 * Address byte selection
+	 * Select 0 for low and 1 for high
+	**/
+	#define PCF8574_A0			0
+	#define PCF8574_A1			0
+	#define PCF8574_A2			0
+
+	#define PCF8574_BASE_ADDR	B00100000
+	#define PCF8574_WADDR		PCF8574_BASE_ADDR | (PCF8574_A0 * B00000001) | (PCF8574_A1 * B00000010) | (PCF8574_A2 * B00000100)
 	#define PCF8574_RADDR		PCF8574_WADDR | 0x01
 	
 	#define TWI_LCD_RS			0	/* RS pin */